Best Things in Life

Good day crafty friends, I have used Quick Quotes Winter Wishes Collection.**

12 X 12 Layout highlighting Quick Quotes Winter Wishes. Using Two pieces of 12 X 12 paper Winter Wishes QQP-W1100 & QQP-W1101**

Using a balloon die as a template, bling was glued to the balloon. The balloon was placed adjestant to the photo.

The butterfly was placed over three roses. a thin layer of glue was painted on the butterfly for the glitter to adhere to.  The roses were placed over the layered paper.

White, Fuchsia, & Blue roses were added underneath the stamped sentiment and meshed bling finished the layout both at the top and the bottom of the layout.


Quick Quotes ** Winter Wishes - is a new paper line.
Sizzix die - labels, butterfly, labels 2
Accu-cutt - large tag
Mesh Bling
Roses

Thanks for stopping by today.
Kathi

Sleigh in Blue & Silver

Hi, Kathi hear to share with you the Quick Quotes monthly challenge, this months challenge is blue & silver. I created this project by creating a mini album that sits in the center of the sleigh,  the mini album is a 6 X 6 using the collection "Winter Bliss",

I covered a wooden sleigh with the paper collection, trimmed with silver trim and silver bling, the sleigh runners were painted with silver glitter paint. then the silver and crystal bling was then added over the glitter paint.  The sleigh also is a center piece, using floral foam and floral embellishments created a beautiful center piece.

 Sleigh and Mini Album

Middle of the mini album.  Mini Album will hold over 24 photo's. 

Quick Quotes Supplies Used:

Paper Collection: Winter Bliss ***New

Want2Scrap: Enamel Dots

Sentiments Quotes Cards 

KS4U Supplies Used:

Silver trim

Silver mesh bling

Spellbinders thinlet dies

Stampin Up Ornament thinly dies

Winter Bliss Snowflake

Hello Quick Quote friends, Kathi here today to share with you two Christmas Cards using quick quotes Winter Bliss & Want2Scrap,

Winter Bliss Snowflake Christmas Cards, I used both colors of the Winter Bliss, 

I used a plastic brick stencil from Want2Scrap, Using speckling, I filled the stencil completely carefully removing the  brink form, washed it off with soap & water (so it could be used again). I set the piece of paper to the side to dry.  I also used the specking to create snow around the brink. after the brick dried I used glue that a white flocking to create a snow like look. 

On the pink paper I used three layers  of the paper layering each layer 1/4" smaller as I stacked them. The edges were distressed by using scissors. The laser snowflakes & the inside of the paper dole were distressed with the pixie pink chalking ink. the glue was applied to the snowflakes then dipped into white/clear glitter. I layered the paper with the last layer popped up using pot dots & then a light pink ribbon was created into a soft bow, Want2scrap bling was added to the center of each of the snowflakes. 

Supplies Used:

Want2scrap - 

    Enamel Dots

Quick Quotes - 

Winter Bliss ***New 

Lazer Cut Snowflakes ***New

2016 Pixie Pink PowderPull Chalk Inks 

Other Supplies:

Pink wire ribbon 

Square paper Dollie

Intricate Dollie - Gypsy Soul Lasercuts

Thanks for stopping by the blog enjoy all the new creations made by each of the designers. 

Kathi 

Winter Bliss Christmas Cards

Hello & welcome to the Quick Quotes & Xyron Blog hop,  I have created 2 cards for this blog hop,  using Quick Quotes new collection called "Winter Bliss".

Christmas Cards front view

 These are the Xyron products used on this projects 

61 days until Christmas Day, and 42 days before I mail my Christmas cards out to friends & family.

CARD 1 - Winter Bliss Tree

I started out with a basic white card stock for the card. This card is 4 1/4 X 5 !/2. I cut the blue patterned paper QQP-WI103 to measure 4 X 5 1/4. I then ran it through the big shot using a cuttlebug embossing folder "Snow Flakes" The tree was created with 1/2 strips of paper trimming each of the ends  indicated above,  The numbers of the paper collection I used was QQP-WI105 for the bottom layer working up QQP-WI101 THEN QQP-WI04 and the top layer is the backside of QQP-WI104.

I stamped Merry Christmas with Aqua PowderPuff Chalking Ink on white card stock which was layered on QQP-WI102. A sentiment was also stamped on the inside of the card. The finishing touch to card 1 was a yarn string, buttons and a pink snowflake to top of the tree. 

CARD 2 - Sleigh Ride

Card 2 base card is also a basic white card stock measuring 4 1/4 X 5 1/2 in the landscape position. QQP-WI103 measuring 4 X 51/4" placing the blue paper on to the white card stock layering a piece of patterned paper QQP-WI104 (white with blue diamond/dot side) measuring 3 3/4 X 5" on top of the blue. A piece of white card stock was placed into the embossing folder "Snow Flakes" then layer it over the patterned paper. I cut out the sleigh and reindeer out of QQP-WI 103, running both through the Xyron sticker maker, then placed then on to the Snow flake back ground flying in the air. 

Stamping Merry Christmas with Aqua PowderPuff Chalking ink on white card stock which was layered on to a blue patterned paper. Finishing the card by stamping a sentiment in the inside of the card. 

Supplies Used: Quick Quotes, 

Winter Bliss paper collection **New

Aqua PowderPuff Chalking Ink

Xyron adhesives

White Card Stock

Stampin Up Christmas stamp sets

Cuttlebug Embossing folder "Snow Flakes"

Thanks for stopping by Quick Quotes & the bog hop with Xryon

Kathi - designer